Description
The “Special SE” winding machine is a universally applicable machine for the repair and training sector.
It is driven by a pole-changing motor with a 3-stage V-belt pulley. Once the set number of turns has been reached, it is switched off automatically. The counter can be switched for left and right rotation. The clutch causes the winding shaft to start up slowly by means of a hand lever or foot switch. The winding process is interrupted by a lever stop switch.
Technical data for Spezial SE:
| wire ø: | 0.1 – 2.0mm |
| Center height: | 290mm |
| winding ø: | Max. 550mm |
| winding shafts ø: | 35mm |
| winding speeds: | 90/ 150/ 180/ 240/ 300/ 480 rpm. |
| Engine power: | 0.4/ 0.5 kW |
| Power supply: | 400V; 50Hz |
| Dimension: | 50cm x 65cm x 50cm |
| Weight: | 54kg |
| Article no.: | 1.012.10 |
With base plate:
| Center height: | 250mm |
| winding ø: | Max. 500mm |
| Dimension: | 95cm x 65cm x 50cm |
| Weight: | 60kg |
| Article no.: | 1.012.11 |
With changing table:
| Center height: | 290mm |
| winding ø: | Max. 550mm |
| Dimension: | 150x70cm |
| Weight: | 140kg |
| Article no.: | 1.012.10 + 1.012.65 |
With changing table, base plate and tailstock:
| Center height: | 250mm |
| winding ø: | Max. 500mm |
| Dimension: | 150cm x 70cm |
| Weight: | 146kg |
| Article no.: | 1.012.11 + 1.012.65 |
